How to update firmware for Philips 10BDL4551T

Download the latest firmware software (update.zip), from Philips support website 

Upgrade the Philips device:

1. 1. In the root directory of a USB disk place the update.zip files.
2. 2. Press in sequence the rounded button and the volume down button behind the display
3. 3. Enter Password (factory default is 1234)
4. 4. Tab Settings
5. 5. Plug-in the USB device.
6. 6. Select Signage display, System updates
7. 7. Select the update.zip file from the list and tab ok.
8. 8. The monitor will reboot to perform the update and reboot again when the operation is finished.

Finishing the upgrade with a factory reset

1. 1. Tab Settings
2. 2. Choose Signage Display, System Tools
3. 3. Tab Factory reset and execute by pressing OK
4. 4. Factory data reset will appear on the screen for a few seconds.
5. 5. The monitor will reboot
6. 6. Do an AC repower

After doing the Firmware upgade and Factory reset follow the Getting started guide to install and configure Digital Sign Client , Guide can be found here.